Basics | Memory Configurations - 9 | |
|
|
|
Memory Configurations
The Power Macintosh 7200 and WS 7250 logic boards have four DRAM DIMM slots, each with a
Note: These computers do not have any main memory soldered to the logic board. At least one DRAM DIMM must be present for the computer to operate.
DRAM DIMMs can be installed individually or in pairs. These computers support linear memory only; therefore, no memory gains are seen when two DIMMs of the same size are installed (that is, memory interleaving is not supported on the Power Macintosh 7200 Series/WS 7250 computers).
