42
General Plumbing Schematic–Flow Exceeding 70-GPM
Plumbing Requirements (continued)
INSTALLATION
General Plumbing Schematics – Flow 30 to 70-GPM
TYPICAL POOL - FLOW LESS THAN 70-GPM POOL/SPILL OVER SPA - TWO PUMP SYSTEM
HEAT PUMP WITH SOLAR PANELS POOL/SPILL OVER SPA - ONE PUMP SYSTEM
Water flow exceeding 70-GPM may damage titanium condenser; such damage will NOT be
covered under the equipment warranty. Install a bypass check valve (AquaCal P.N.: 2556, or
equal to Del Industries P.N.: CO-0103) whenever water flow rate may exceed 70-GPM. Contact
AquaCal Technical Support (727-823-5642) for guidance regarding testing for water flow rate.
Failure to heed the following may result in damage to
equipment.
CAUTION !
Bypass Check Valve
AquaCal P.N.: 2556
-or equal to-
Del Ind. PN: CO-0103
TYPICAL POOL - FLOW GREATER THAN 70-GPM