Date: July 17, 2009 No.
Remove and discard the two 3/8 bolts and top locking flange nuts closest to the cylinder.
NOTE: Stroke the cylinder slightly forward to get access to the bolts. Shut down the log splitter after stroking the cylinder. DO NOT replace the bolts while the unit is running.
Wedge
Cylinder
Use a 1/2” drill bit to bore out the mounting holes closest to the cylinder.
.563 x 1.38 x .109 flat steel washer (p/n 06442000)
nut (p/n 06536300). Tighten to 50
Page 2 of 2