08/2004 | WRS System Guide | 0 7 |
| | |
What About the Wired Lens Control System?
Most parts of the wired Lens Control System can still be used with some minor limitati- ons. Below is a short run down of compatibilities. Details can be found in the Lens Control System manual.
The Zoom Main Unit (ZMU-1 or ZMU-2) can be connected with a cable to the UMC-1, Studio LDB, Studio LDB-2, Lite LDB, Lite LDB-2 or FEM-2 to control zoom. It is also possible to connect the Zoom Main Unit directly to the CLM-1 motors, which in turn must be connected to a UMC-1, LDB, LDB-2, FEM-2 or external power supply. Having multiple zoom controllers connected (like a ZMU and a WZU, for instance) is not a pro- blem, even though one of them will be the master and the other one will not function.
One or two Focus Iris Units (FIU-1) can be connected to a ZMU-1 or ZMU-2. From ARRICAM Software packet 03E on this configuration will also work with the ARRI- CAM system. When using the FIU-1 with the ARRICAM system, it is recommended to not use a Wireless Main Unit or WHA-2 at the same time.
Additional Literature
Wireless Remote System Brochure | Ident. No. K5.58511.0 (English) |
Lens Control System Instruction Manual | Ident. No. K5.52423.0 (English) |
Lens Control System Bedienanleitung | Ident. No. K5.52422.0 (German) |
Wireless Remote Control (WRC-1) | Instruction Manual | Ident. No. K5.43668.0 (English) |
Wireless Remote Control (WRC-1) | Bedienungsanleitung | Ident. No. K5.43660.0 (German) |