ASK Proxima Lamp Information Guide
|
|
| Press and Hold the Up Arrow Button on the Keypad for | Press the Menu Button, choose Setting, then choose | |
PRO AV 9410 | 3700 | 1000 Hours | 40+ seconds. The displayed Data value will be the | "Lamp Age" and select. You will be asked to confirm | |
|
|
| hours remaining on the lamp. | the reset. | |
|
|
| Press and Hold the Up Arrow Button on the Keypad for | Press the Menu Button, choose Setting, then choose | |
PRO AV 9500 | 5200 | 1500 Hours | 40+ seconds. The displayed Data value will be the | "Lamp Counter Reset" and select. Then choose | |
which lamp to reset and select. You will be asked to | |||||
|
|
| hours used on the lamp. | ||
|
|
| confirm the reset. | ||
|
|
|
| ||
|
|
| Press and Hold the Up Arrow Button on the Keypad for | Press the Menu Button, choose Setting, then choose | |
PRO AV 9550 | 5800 | 1500 Hours | 40+ seconds. The displayed Data value will be the | "Lamp Counter Reset" and select. Then choose | |
which lamp to reset and select. You will be asked to | |||||
|
|
| hours used on the lamp. | ||
|
|
| confirm the reset. | ||
|
|
|
| ||
|
|
| Press and Hold the Up Arrow Button on the Keypad for | Press the Menu Button, choose Setting, then choose | |
PRO AV RX7000 | 250 NITS | 2000 Hours | 40+ seconds. The displayed Data value will be the | "Lamp Age" and select. You will be asked to confirm | |
|
|
| hours remaining on the lamp. | the reset. | |
|
|
|
| With the projector in Standby, press and hold the | |
|
|
|
| "Video", "Setting", and "Quick Align+" at the same | |
|
|
|
| time for six seconds or more. While the "Standby" | |
| 1000 | 1000 Hours | "Lamp Replace" Indicator blinks on and off when the | and "Operate" indicators are on, press the "Video", | |
PRO AV SX1 | "Setting", and "Computer" buttons at the same time. | ||||
lamp hours reach 1000. | |||||
|
|
| The "Standby" and "Operate" indicators will blink two | ||
|
|
|
| ||
|
|
|
| seconds alternately, and after blinking the projector | |
|
|
|
| returns to the Standby state (the Standby Indicator | |
|
|
|
| lights up). This completes the lamp reset. | |
|
|
|
|
| |
|
|
|
| Press and Hold the "Reset" button on the keypad or | |
|
|
|
| "Timer" on the remote control for three seconds, and | |
|
|
|
| the lamp hours used will be displayed. Release | |
|
|
| Press and Hold the "Reset" button on the keypad or | button. While the Lamp Time is being displayed, | |
|
|
| press the "Reset" button on the keypad or the | ||
S520 | 800 | 2000 Hours | "Timer" on the remote for three seconds. The lamp | ||
"Menu" button on the remote. Use the Left Arrow | |||||
|
|
| hours used will be displayed. | ||
|
|
| Button on the keypad or the Mouse disk on the | ||
|
|
|
| ||
|
|
|
| remote to choose "0" on the screen. Press and Hold | |
|
|
|
| the "Reset" button for three seconds. The lamp timer | |
|
|
|
| will be reset. | |
|
|
|
|
| |
S540 | 1000 | 2000 Hours | Press the Menu Button, choose Setup, then choose | Press the Menu Button, choose Setup, then choose | |
Service, then Info | Service, then Reset Lamp Timer | ||||
|
|
|
Copyright InFocus Corp. | 12 | 7/13/2004 |