
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage, CPU VTT Voltage, NB Voltage, MEM Voltage, VTT DDR Voltage, South Bridge Voltage, SB Voltage2
The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.
OPT
BIOS SETUP UTILITY
|
|
|
|
|
|
| Power |
|
|
|
|
|
| Fan configuration |
OPT_Fan 1 Reading | :N/A |
| ||
| mode setting | |||
OPT_Fan1 | [DUTY CYCLE] |
|
| |
Duty Cycle Mode | [90%] |
|
|
|
OPT_Fan 2 Reading | :N/A |
|
| |
OPT_Fan2 | [DUTY CYCLE] |
|
| |
Duty Cycle Mode | [90%] |
|
|
|
OPT_Fan 3 Reading | :N/A |
|
| |
OPT_Fan3 | [DUTY CYCLE] |
|
| |
Duty Cycle Mode | [90%] |
|
|
|
| Select Screen |
| Select Item |
+- | Change Field |
F1 | General Help |
F10 | Save and Exit |
ESC | Exit |
v02.58 (C)Copyright
The onboard hardware monitor automatically detects the optional fan speed. If the fan is not connected to the motherboard, the field shows N/A.
OPT_Fan1/2/3
Allows you to select the optional fan control mode. When this item is set to [DUTY CYCLE], you can configure the Duty Cycle Mode item. If you set this item to
Configuraiton options: [DUTY CYCLE]
You need to connect the thermal sensor cables to the OPT_TEMP1/2/3 connectors to enable this function.
Duty Cycle Mode [90%]
Allows you to set the fan duty cycle. When the OPT_Fan1/2/3
Configuraiton options: [70%] [80%] [90%] [100%]
TargetTemp Value [32]
Allows you to set the temperature at which the optional fan starts up. When the OPT_Fan1/2/3
ROG Maximus Formula (Special Edition) / Maximus Formula |