If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), set this item to [AHCI].
Hard Disk Write Protect [Disabled]
Disables or enables device write protection. This will be effective only if device is accessed through BIOS.
Confiuration option: [Disabled] [Enabled]
SATA Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
4.3.7AHCI Configuration
This menu is for AHCI configuration. It appears only when you set the Configure SATA as item under SATA Configuration to [AHCI].
AHCI | Settings |
|
AHCI | CD/DVD Boot Time out | [15] |
|
|
|
AHCI Port1 [Not Detected]
AHCI Port2 [Not Detected]
AHCI Port3 [Not Detected]
AHCI Port4 [Not Detected]
AHCI Port5 [Not Detected]
AHCI Port6 [Not Detected]
ACHI CD/DVD Boot Time out [15]
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
ACHI Port1~6 [XXX]
Displays the
Some SATA CD/DVD in AHCI mode need to wait ready longer.
AHCI Port1 |
|
|
Device | :Not Detected |
|
|
|
|
SATA Port1 |
| [Auto] |
SMART Monitoring | [Enabled] | |
Select the type of devices connected to the system.
ROG Maximus Formula (Special Edition) / Maximus Formula |