6.Line In port (light blue). This port connects the tape, CD, DVD player, or other audio sources.

7.Line Out port (lime). This port connects a headphone or a speaker. In 4.1-channel, 5.1-channel, and 7.1-channel configurations, the function of this port becomes Front Speaker Out.

8.Microphone port (pink). This port connects a microphone.

9.Side Speaker Out port (gray). This port connects the side speaker in an 7.1-channel audio configuration.

Refer to the audio configuration table below for the function of the audio ports in 2.1, 4.1, 5.1, or 7.1-channel configuration.

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration

Port

Headset

4.1-channel

5.1-channel

7.1-channel

2.1-channel

 

 

 

 

 

Light Blue

Line In

Line In

Line In

Line In

Lime

Line Out

Front Speaker Out

Front Speaker Out

Front Speaker Out

 

Pink

Mic In

Mic In

Mic In

Mic In

 

Orange

–

–

Center/Subwoofer

Center/Subwoofer

 

Black

–

Rear Speaker Out

Rear Speaker Out

Rear Speaker Out

 

Gray

–

–

–

Side Speaker Out

 

10.USB 3.0 ports 3, 4, 5 and 6. These 9-pin Universal Serial Bus (USB) ports connect to USB 3.0/2.0 devices.

•DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows® operating system.

• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows® OS environment and after the USB 3.0 driver installation.

•USB 3.0 devices can only be used as data storage only.

•We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices.

11.HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content.

12.DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to output RGB Signal to CRT and isn’t compatible with DVI-I.

13.USB 2.0 ports 7 and 8. These two 4-pin Universal Serial Bus (USB) ports are available for connecting USB 2.0/1.1 devices.

1-12

Chapter 1: Product introduction