
[RAID] | Set to [RAID Mode] when you want to create a RAID configuration from the |
| SATA hard disk drives. |
Aggressive LPM Support [Disabled]
This item appears only when you set SATA Mode Selection to [AHCI] and allows you to enable or disable PCH entering link power state aggressively. Configuration options: [Disabled] [Enabled]
S.M.A.R.T. Status Check [On]
S.M.A.R.T.
Hot Plug [Disabled]
These items appear only when you set the SATA Mode Selection item to [AHCI] and allow you to enable/disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled]
2.6.4System Agent Configuration
Allows you to enable or disable
CPU Display Audio[Enabled]
Allows you to enable or disable the CPU display audio support. Configuration options: [Enabled] [Disabled].
DVI Port Audio [Off]
Allows you to enable or disable the DVI port. Configuration options: [On] [Off].
Graphics Configuration
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select the primary display from iGPU, PCIE and PCI Graphics devices. Configuration options: [Auto] [CPU Graphics] [PCIE] [PCI]
CPU Graphics Memory [Auto]
Allows you to set the system memory size allocated to DVMT 5.0 used by the iGPU. Configuration options: [Auto] [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M]
Render Standby [Auto]
Allows you to enable or disable Intel® Graphics Render Standby support to reduce the iGPU power use when the system is idle. Configuration options: [Auto] [Disabled] [Enabled]
CPU Graphics
Allows you to empower both integrated and discrete graphics devices for the multi- monitor output. The CPU graphics shared system memory size will be fixed at 64MB. Configuration options: [Disabled] [Enabled]
Chapter 2: Getting started |