Memory Configuration

Memory Configuration

 

Memclock Mode

 

[Auto]

MCT Timing Mode

 

[Auto]

Bank Interleaving

[Disabled]

Enable Clock to

ALL DIMMs

[Disabled]

MemCLK Tristate

C3/ATLVID

[Disabled]

Memory Hole Remapping

[Enabled]

Memclock Mode [Auto]

Select the DRAM Frequency programming method. If Auto, the DRAM speed will be based on SPDs. If Limit, the DRAM speed will not exceed the specified value. If Manual, the DRAM specified will be programmed regardless.

Configuration options: [Auto] [Limit] [Manual]

MCT Timing Mode [Auto]

Configuration options: [Auto] [Manual]

Bank Interleaving [Disabled]

Enable or disable the Bank Memory Interleaving.

Configuration options: [Disabled] [Auto]

Enable Clock to All DIMMs [Disabled]

Enable or disable the Unused Clocks to DIMMs Even Memory Slots are not populated.

Configuration options: [Disabled] [Enabled]

MemCLK Tristate C3/ATLVID [Disabled]

Enable or disable the MemCLK Tri-Stating during C3 and Alt VID. Configuration options: [Disabled] [Enabled]

Memory Hole Remapping [Enabled]

Enable or disable the Memory Remapping Around Memory Hole. Configuration options: [Disabled] [Enabled]

2-22

Chapter 2: BIOS setup