3.Intel® B75 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_1~5 [blue])

These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical disc drives via Serial ATA 3.0 Gb/s signal cables.

SATA3G_3

SATA3G_2

SATA3G_1

GND RSATA TXP3

RSATA TXN3 GND RSATA RXN3 RSATA RXP3

GND

GND RSATA TXP2 RSATA TXN2 GND RSATA RXN2 RSATA RXP2 GND

GND RSATA TXP1 RSATA TXN1 GND RSATA RXN1 RSATA RXP1 GND

P8B75-V

 

 

 

 

SATA3G_5

SATA3G_4

 

GND RSATA RXP5

RSATA RXN5 GND RSATA TXN5 RSATA TXP5

GND

GND RSATA RXP4 RSATA RXN4 GND RSATA TXN4 RSATA TXP4 GND

 

P8B75-V SATA 3.0Gb/s connectors

When using NCQ, set the SATA Mode Selection in the BIOS to [AHCI]. Refer to section 3.5.3 SATA Configuration for details.

4. USB 3.0 connector (20-1 pin USB3_34)

This connector is for the additional USB 3.0 ports, and complies with the USB 3.0 specificaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.0 connector, you can have a front panel USB 3.0 solution.

USB3_34

P8B75-V

P8B75-V USB3.0 Front panel connector

The USB 3.0 module is purchased separately.

Chapter 2

ASUS P8B75-V

2-17