Asus P8H77-M PRO Deleting a RAID set, SELECT DISKS, Create Volume, CREATE VOLUME, 2. Delete RAID Volume, When the, RAID 5: 64KB, RAID 0: 128KB, RAID 10: 64KB

4 Chapter

2.	Enter a name for the RAID set and press <Enter>.
3.	When the RAID Level item is selected, press the up/down arrow key to select a RAID
	level to create, and then press <Enter>.
4.	When the Disks item is selected, press <Enter> to select the hard disk drives you want
	to include in the RAID set. The SELECT DISKS screen appears:
				[ SELECT DISKS ]
		Port Drive Model		Serial #	Size	Status
		0	ST3160812AS	9LS0HJA4	149.0GB	Non-RAID Disk
		1	ST3160812AS	9LS0F4HL	149.0GB	Non-RAID Disk
	2		ST3160812AS	3LS0JYL8	149.0GB	Non-RAID Disk
	3		ST3160812AS	9LS0BJ5H	149.0GB	Non-RAID Disk
			Select 2 to 6 disks to use in creating the volume.
			[↑↓]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5.	Use the up/down arrow key to select a drive, and then press <Space> to select. A small
	triangle marks the selected drive. Press <Enter> after completing your selection.
6.	Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10
	and 5 only),and then press <Enter>. The available stripe size values range from 4KB
	to 128KB. The following are typical values:

RAID 0: 128KBRAID 10: 64KBRAID 5: 64KB

We recommend a lower stripe size for server systems, and a higher stripe size for multimedia computer systems used mainly for audio and video editing.

7.When the Capacity item is selected, enter the RAID volume capacity that you want and press <Enter>. The default value indicates the maximum allowed capacity.

8.When the Create Volume item is selected, press <Enter>. The following warning message appears:

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9.Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the CREATE VOLUME menu.

Deleting a RAID set

Take caution when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set.

To delete a RAID set:

1.From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears:

4-30 Chapter 4: Software support