J-Micron eSATA/PATA Controller [Enabled]

Configuration options: [Enabled] [Disabled]

Controller Mode [IDE]

This item appears only when you enable the previous item.

Configuration options: [RAID] [IDE] [AHCI]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

4.4.6PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

Take caution when changing the settings of the PCI PnP menu items. Incorrect field values can cause the system to malfunction.

BIOS SETUP UTILITY

 

Advanced

 

 

 

Advanced PCI/PnP Settings

 

NO: lets the BIOS

WARNING: Setting wrong values in below sections

configure all the

devices in the system.

 

may cause system to malfunction.

YES: lets the

Plug And Play O/S

[No]

operating system

configure Plug and Play

(PnP) devices not required for boot if your system has a Plug and Play operating system.

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

Plug And Play O/S [No]

When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices that are not required for boot. Configuration options: [No] [Yes]

ASUS P5KC

4-25