4.3.11ASUS Drive Xpert
Drive Xpert, an ASUS exclusive technology, secures the data on your hard disk and enhances hard drive performance without the hassles of complicated configurations. With its
Installing Serial ATA hard disks
For using Drive Xpert in Windows® operating system, we recommend that you prepare three hard disks: one hard disk with operating system already installed, and two hard disks for Drive Xpert configuration.
To install Serial ATA hard disks for Drive Xpert configuration
1.Install two SATA hard disks into the drive bays.
2.Plug one end of the SATA signal cables to each drive, and plug the other end of the SATA signal cables to the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on the motherboard. Refer to page
3.Connect a SATA power cable to the power connector of each drive.
•For optimal performance, we highly recommend that you install identical
drives of the same model and capacity.
•The SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on the motherboard do not support ATAPI devices and
Launching Drive Xpert in Windows® OS
After installing Drive Xpert from the bundled support DVD,
for Drive Xpert: EZ Backup and Super
Speed.
• Before using the Drive Xpert function, ensure that you have installed the Marvell 61xx driver in the system.
•Ensure to install two hard disks to the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors when the Drive Xpert mode in BIOS setup is configured as EZ Backup or Super Speed. Otherwise, the HDD LED in the front panel flashes.
Chapter 4: Software support |