Using Drive Xpert function in Express Gate environment

You may use Drive Xpert function in Express Gate environment by preparing only two hard disks.

For Express Gate environment, you need to use another computer to install Express Gate on a USB flash disk drive in advance.

Follow below instructions to complete the installation:

1.Plug a USB flash disk drive in a computer with OS already installed.

2.Refer����� to�� the��� Express������� Gate���� installation������������

on page 4-49. Ensure to select������ USB as the target disk volume w���hen the��� Choose target volume screen appears.

3.Plug the USB flash disk drive to the motherboard. Restart the system, and launch the Express Gate.

Launching Drive Xpert

 

To open the ASUS Utility panel, click

. Launch Drive Xpert from the ASUS

Utility panel. The main screen as shown below appears. Select EZ Backup or Super Speed according to your need.

Before using the Drive Xpert function, ensure that you have back up all your data in your hard disks.

•EZ Backup erases all original data in the hard disk connected to the SATA_E2 (white, port 1) connector on the motherboard.

•Super Speed erases all original data in both hard disks.

ASUS P5QC

4-45