Manuals / Brands / Laundry Appliance / Clothes Dryer / Asus / Laundry Appliance / Clothes Dryer

Asus TUSL2-C Notes for JumperFree Mode, SETUP BIOS, System Hangup, CPU Upgrade/Reinstallation

1 106

Download 106 pages, 3.18 Mb

SETUP BIOS .4

Notes JumperFree

4. BIOS SETUP

Notes for JumperFree Mode

CPU Upgrade/Reinstallation

To ensure that your system can enter BIOS setup after the processor has been changed or reinstalled, your system will start up running at a bus speed of 66MHz and a fail-safe CPU internal frequency (4x66MHz). It will then automatically take you to the Advanced menu with a popup menu of all the officially possible CPU internal frequencies.

System Hangup

If your system crashes or hangs due to improper frequency settings, power OFF your system and restart. The system will start up in safe mode running at a bus speed of 66MHz and enter BIOS setup.

60	ASUS TUSL2-C User’s Manual

Contents

Page USER'S NOTICE Product Name: ASUS TUSL2-C Manual Revision: 1.04 E769 ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Technical Support ASUS COMPUTER INTERNATIONAL (America) ASUS COMPUTER GmbH (Europe) CONTENTS 3.7.1 Expansion Card Installation Procedure 3.7.2 Assigning IRQs for Expansion Cards 3.7.3 Communication and Networking Riser (CNR) Slot 3.7.4 Accelerated Graphics Port (AGP) Slot INDEX FCC & DOC COMPLIANCE Federal Communications Commission Statement •This device may not cause harmful interference, and •Re-orientor relocate the receiving antenna •Increase the separation between the equipment and receiver 1.1How This Manual Is Organized 1.2 Item Checklist 2.1The ASUS TUSL2-C 2.1.1 Specifications Around-the-Clock Intrusion Detection: PC Health Monitoring: CNR Support: Enhanced ACPI & 2.1.2Optional Components 2.1.3 Performance 2.1.4Intelligence 2.2TUSL2-CMotherboard Components 2.2.1Component Locations 3.1TUSL2-CMotherboard Layout 3.2Layout Contents 3. HARDWARE SETUP SETUP H/W 3.3Hardware Setup Procedure 3.4Motherboard Settings Motherboard Feature Settings 1) JumperFree™ Mode (JEN) Advanced Menu) Setting JEN 2)USB Device Wake Up (USWR01, USWR56) Control NOTES 1.For enabling Wakeup during STR/STD/Soft off functions, set to Enable Setting Onboard CMI8738 PCI Audio Setting (AUDIO_EN) AUDIO_EN 4)Keyboard Power Up (KBPWR) KBPWR 5)Voltage I/O Setting (VIO) Setting VIO 6)CPU External Frequency Setting (DSW) External 1.In JumperFree mode, all dip switches must be set to OFF CPU Core:Bus Freq. Multiple 4.4 Advanced Menu External Frequency Table CPU:DRAM CPU Frequency Selection Switches Ratio 3.5System Memory (DIMM) 3.5.1 General DIMM Notes 3.5.2Memory Installation 3.6Central Processing Unit (CPU) 3.7Expansion Cards 3.7.1 Expansion Card Installation Procedure 3.7.2Assigning IRQs for Expansion Cards Standard Interrupt Assignments Interrupt Request Table for this Motherboard 3.7.3 Communication and Networking Riser (CNR) Slot 3.7.4Accelerated Graphics Port (AGP) Slot 3.8External Connectors 3)Universal Serial Bus Ports 0 & 1 (Black two 4-pinUSB) 4)Parallel Port Connector (Burgundy 25-pinPRINTER) Onboard Parallel Port 4.4.2 I/O Device Configuration) NOTE: Serial printers must be connected to the serial port 6)Game/MIDI Connector (Gold 15-pinGAME_AUDIO) (optional) 7)Audio Port Connectors (Three 1/8” GAME_AUDIO) (optional) 8)Floppy Disk Drive Connector (34-1pinFLOPPY) 9)Primary (Blue) / Secondary IDE Connectors (Two 40-1pinIDE) 10)IDE Activity LED (2-pinIDELED) do not place jumper caps over these pins 12)Internal Audio Connectors (4-pinCD1, AUX, VIDEO, MODEM) 13)Headphone True-LevelLine Out Header (3-pinEARPHONE) 14)Internal Microphone Connector (3-pinMIC2) 15)ASUS iPanel Connector (12-1pin AFPANEL) 16)ASUS SmartCard Connector (10-1pin SMARTCON) 17)ASUS iPanel Audio Connector (12-1pins AAPANEL) 18)Chassis Intrusion Lead (2-pinACHA) 19)Wake-On-LANConnector (3-pinWOL_CON) Wake On LAN or PCI Modem 4.5.1 Power Up Control 20)Wake-On-RingConnector (2-pinWOR_CON) 21)USB Headers (10-1-pinUSB56) 22)SMB Connector (5-1pin SMB) 23)ATX Power Supply Connector (20-pinblock ATXPWR) 24)Power Supply Thermal Sensor Connector (2-pinJTPWR) The following is for items 25–31 25)System Power LED Lead (3-1pin PWRLED) 26)Keyboard Lock Switch Lead (2-pinKEYLOCK) 27)System Warning Speaker Connector (4-pinSPEAKER) 28)System Message LED Lead (2-pinMSG.LED) 29)System Management Interrupt Lead (2-pinSMI) Page 3.9Starting Up the First Time Award BIOS Beep Codes 4. BIOS SETUP Powering Off your computer: Start Shut Down Shut down the computer 4.1 Managing and Updating Your BIOS 4.1.1 Upon First Use of the Computer System 4.BIOS SETUP 1. Save Current BIOS to File Save Current BIOS To File A:\XXX-XX.XXX SETUP BIOS 4.1.2Updating BIOS Procedures Page 4.2BIOS Setup Program 4.2.1BIOS Menu Bar 4.2.2 Legend Bar General Help Saving Changes and Exiting the Setup Program Scroll Bar Sub-Menu 4.3Main Menu 4.3.1Primary & Secondary Master/Slave [User Type HDD] Translation Method [LBA] Cylinders Translation Method Head Sector CHS Capacity Maximum LBA Capacity Multi-SectorTransfers [Maximum] 4.3.2 Keyboard Features Language [English] A Note about Passwords Forgot the Password Halt On [All Errors] Installed Memory [XXX MB] 4.4Advanced Menu CPU Vcore CPU Level 1 Cache, CPU Level 2 Cache [Enabled] CPU Level 2 Cache ECC Check [Disabled] BIOS Update [Enabled] PS/2 Mouse Function Control [Auto] Notes for JumperFree Mode 4.4.1Chip Configuration SDRAM RAS to CAS Delay SDRAM RAS Precharge Time SDRAM Cycle Time (Tras, Trc) [7T, 9T] SDRAM Page Closing Policy [One Bank] CPU Latency Timer [Enabled] Memory Hole At 15M-16M[Disabled] PCI 2.1 Support [Enabled] High Priority PCI Mode [Enabled] Onboard PCI IDE Enable [Both] SDRAM Data Driving Mode [Normal] 4.4.2I/O Device Configuration UART2 Use as [Com Port] Onboard Parallel Port [378H/IRQ7] Parallel Port Mode ECP DMA Select Parallel Port Mode [ECP+EPP] 4.4.3PCI Configuration PCI/PNP IRQ Resource Exclusion 4.4.4Shadow Configuration 4.5Power Menu Video Off Option [Suspend ->Off ] Video Off Method [DPMS OFF] HDD Power Down [Disabled] Suspend-to-RAMCapability [Disabled] Suspend Mode [Disabled] 4.5.1Power Up Control Wake On PS2 KB/PS2 Mouse/CIR [Disabled] Wake Up By Keyboard [Space Bar] Wake On PS2 KB/PS2 Mouse/CIR Wake On USB for STR State [Disabled] USB Device Wake Up 4.5.2Hardware Monitor 4.6Boot Menu Boot Sequence Plug & Play O/S [No] Boot Virus Detection [Enabled] Quick Power On Self Test [Enabled] Boot Up Floppy Seek [Enabled] Full Screen Logo [Enabled] 4.7Exit Menu Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Page 5.1Install Operating System 5.2 Start Windows 5.3TUSL2-CMotherboard Support CD 5.3.1 Installation Menu PC-Cillin 2000Vx.xx: Adobe Acrobat Reader Vx.x: Cyberlink Video and Audio Applications: •ASUS Screen Saver: Installs ASUS screen saver on the PC 5. SOFTWARE SETUP 6.1Winbond Smart Manager 6.1.1 Setting Up Smart Manager ManagerSmart REFERENCES/W6 6. SOFTWARE REFERENCE Restart smart card reader 6.1.2Starting to Use Smart Manager 6.1.3Smart Manager Modes 6.2ASUS PC Probe 6.2.1 Starting ASUS PC Probe 6.2.2Using ASUS PC Probe Settings CPU Cooling System Setup History Information Hard Drives Memory Device Summary DMI Explorer Utility Execute Program 6.2.3ASUS PC Probe Task Bar Icon 6.3Multi-ChannelAudio Feature Setup 6.3.1 The C-MediaAudio Mixer 6.3.2 The C-MediaAudio Demo Program 6.3.3 Connector Configuration 6.4ASUS LiveUpdate 6.5CyberLink PowerPlayer SE 6.5.1 Starting CyberLink PowerPlayer SE 6.5.2 CyberLink PowerPlayer Control Panel 6.6CyberLink PowerDVD 6.6.1 Starting CyberLink PowerDVD 6.6.2 CyberLink PowerDVD User Interface 6.7CyberLink VideoLive Mail 6.7.1Starting VideoLive Mail 6.7.2 CyberLink VideoLive Mail User Interface 7.1 Glossary APPENDIX Boot Bus Master IDE Byte (Binary Term) COM Port LPT Port (Line Printer Port) MMX (Klamath) CPU as well as other OnNow PC100 ROM (Read Only Memory) SCSI (Small Computer System Interface) SDRAM (Synchronous DRAM) SPD for SDRAM module SSE (Streaming SIMD Extensions) INDEX Page Page NOTES