7.Go
To place a call using an automatic dialing button, do the following:
1.Go
■You hear a dial tone.
2.Press 
Feature 
, and then press the dial keypad number assigned to the Automatic Dialing button entry you wish to call. For example, to call the number stored in Feature Directory entry F3, press 
Feature 
, and then press 
3
.
■You hear a ringback tone.
Personal AD Lists
To program a personal AD list item, do the following:
1.On a sheet of paper, write down the phone numbers and feature access codes you want to store.
2.Go
■You hear a dial tone.
3.Dial the AD Program feature access code _____.
■You hear a dial tone.
4.Dial the personal list number (1, 2, or 3).
■You hear a dial tone.
5.Dial the list item (1, 2, 3, and so on).
■You hear a dial tone.
6.Dial the phone number or feature access code you want to store (up to 24 digits).
7.Press 
# 
.
■You hear a confirmation tone followed by a dial tone.
Issue 1 March 1996 7
