10
Getting started
Belt clip & optional headset

Install belt clip as shown (optional).

INT
Plug 2.5 mm headset
into the jack on the side
of handset (beneath
small rubber flap).
NOTE: If the sound
quality of the headset
is poor, try unplug-
ging it, and firmly
plugging it in again.
Snap belt clip
into the notches
on both sides of
handset. To release belt clip
from handset, lift one
side of the belt clip
out of the notch first
before detaching the
whole belt clip from
handset.

For hands-free telephone conversations, use any industry standard 2.5 mm head-

set (purchased separately). For best results, use an AT&T 2.5 mm head-

set. To order an AT&T 2.5 mm headset, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada

dial 1 (866) 288-4268.