1. Power Socket
The power cord to the AC source plugs in here.
2. Power Switch
This is a standard rocker switch that powers the unit On and Off.
3. Console Port Section
The Cat. 5 cables from the Console Modules (see p. 10) plug in here.
4. Firmware Upgrade Port
The Firmware Upgrade Cable that transfers the firmware upgrade data from the administrator’s computer to the KM0216 / KM0432 (see p. 62), plugs into this
5. Daisy Chain Ports
When Daisy Chaining Units (see p. 19), the daisy chain cables plug in here.
The upper port is the Chain In port; the lower one one is the Chain Out port. The Chain In port is not used on the Master (First Stage) unit.
6. Computer Port Section
The Cat. 5 cables that link the KM0216 / KM0432 to the KVM Adapter cables that connect to the computers plug in here.
9