Quick Installation 5

CHAPTER 2:

Installing Hardware

This chapter will guide you through the physical installation of your new All-in-Wonder® X1800 Series graphics card.

Quick Installation

For experienced users and system administrators, follow these brief instructions for installing your All-In-Wonder® X1800 card in the shortest possible time.

Installation Steps
1Uninstall the drivers and software for your old graphics card.

If you are using a motherboard containing an on-board graphics solution and do not intend to use it as part of a multiple monitor display, disable it.

2Shut down and disconnect your computer system.3Remove any previously installed card.4Install your new All-In-Wonder® X1800 card.5Reassemble and connect your computer system.

6Install the All-In-Wonder® X1800 drivers and configuration software from the ATI Installation CD-ROM by doing one of the following:

•Run through the automatic ATISETUP utility; or

•Start > Run > X:\ATISETUP.EXE (where X is the drive letter of your CD-ROM drive).

Detailed Installation

The following instructions will take you step by step through the installation of your new All-In-Wonder® X1800.