NetCamera NVW
2.4 Assembling the Stand and Connecting to a Network
The camera can be assembled in two different ways; either from the top of the unit or the bottom. Assemble the stand and fix it to the
Use the three screws and plugs provided to fix the stand bracket to a wall, ceiling or other convenient fixing point.
The stand can be adjusted to allow the camera a full 360º of rotation and a pan and tilt action.
Follow the above steps to mount from the base of the unit, attaching the stand bracket to the mounting point on the base of the unit.
Ensure the camera is fixed securely otherwise it may fall and cause injury.
The camera is not waterproof and should not be mounted outside or in a position where it could become wet.
Connect the power adapter to the
16 |