NetCamera NVW
connected in this box. This default setting will let the camera connect to ANY access point under the infrastructure network mode.
•Ad-Hoc Type: Please select between 802.11g or 802.11b if You are using a AD-Hoc network.
Security Configuration: Wireless network communications can be intercepted easily. This option will help you protect your wireless network.
•Authentication: Open communicates the key across the network. Shared allows communication only with other devices with identical WEP settings. WPA-PSKYou have to insert a KEY.
•Encryption Type: This option allows you to configure the setting of data encryption. The WEP/WPA key must be set before the data encryption is enforced.
•WEP KEY/WPA-PSK KEY: To enable WEP Encryption, you should decide the encryption format first by selecting the ASCII or HEX option, and then input the WEP key (in the following Key 1~4 box). To enable WPA Encryption, you have to inser directly the key (minimum 8 characters). Pre-Shared Key: This is used to identify each other in the network. Enter the name in the Pre- Shared Key box, and this name must match the Pre-Shared Key value in the remote device. You can check in the picture an example of configuration in WPA-PSK.
