ENGLISH
1.7 How To create a HomePlug AV network using Simple Connect
To create a HomePlug AV network, you need at least two NetPower 301AV devices using random Private Network Names. When you press Simple
Connect 
on both devices, a common Private Network Name will be automatically generated to enable them to communicate with each other.
1.Press Simple Connect 
for two seconds (do not press Simple Connect for more than 2 seconds) on first HomePlug. After you
release the button, the Power LED 
will blink. If the Power LED 
did not blink, press Simple Connect 
again for two seconds.
2.Press Simple Connect 
for two seconds on the second
HomePlug. After you release the button, the Power LED 
will
blink. If the Power LED 
did not blink, press Simple Connect 
again for two seconds. Make sure to press Simple Connect 
on the second HomePlug within two minutes after you press Simple Connect 
on the first HomePlug.
3.To confirm if the connection was established, check the LEDs.
The Power LEDs 
and the Powerline Activity LEDs 
on both HomePlugs are on. The LED colors (Activity LEDs 
) represents the connection rate within the HomePlug AV network whether it is good (red), better (amber), or best (green).
32 |