Reinforced stiffeners on all side panels.
Increased vent space on top sections
Hat section features integrated provision for clean wire management
The Atlas Sound FMA series features completely redesigned "hat" sections for added strength & greater versatility in rack rail positioning. The hat sections include a rack rail slot along with holes spaced the entire length of the hat section to allow for easy, secure positioning of the rack rails. This newly designed hat section is also spaced in the cabinet to allow the installation of standard 19" blank panels vertically inside the cabinet. This is perfect for
For optimum wire management, unique, removable 2RU high panels are positioned behind cutouts at the top & bottom on the rear of the cabinet. These panels include a variety of knockouts ranging in size from 3⁄8" to 11⁄4" to facilitate rigid or flexible conduit. 3⁄8" knockouts (x2) are also included on this panel to allow installation of BNC connectors commonly used for diversity wireless microphone systems. The cabinet top sections offer large, vent openings for maximum ventilation. This comes in especially handy when thermal sensitive amplifiers and/or digital rack mount equipment are mounted in a FMA cabinet.
Leg levelers are included with the FMA series at no additional cost to provide alignment regardless of floor evenness but in instances where maneuverability of the cabinet is required, an optional caster kit allows easy positioning without significantly increasing the cabinet’s overall height.
Cabinets include two pair (front/back) 11 gauge plated steel rack rails tapped 10- 32 and include the new Atlas Sound RU indicators to aid in aligning equipment during installation. Threaded inserts are included on the front of the cabinet to save installation time when a front door is required.
Optional FMA series side panels
UL listing & seismic rating pending.
OPTIONAL ACCESSORIES
Vented side panels
Matches
Matches
Matches
FMARTK25
Includes (2) locking swivel and (2) rigid casters with mounting hardware. For
Perforated top panels
Solid top panels
High power top mounting fan kits
| Rack Rail to 1.0" Front | Rack Rail to 3.0" Front | Overall Usable Mounting | Front Rack Rail to Rear Door | |
MODEL | Door Clearance (with | Door Clearance (with front | Depth (front rail face to rear | Clearance (with front rack rail | |
front rack rail in foward | rack rail in | rail face with rails at full front | in farthest forward position) | ||
| |||||
| most position)* | postition)* | extension front to back) |
| |
|
|
|
|
| |
2.0" (50.8mm) | 3.813" (96.8mm) | 34.08" (865.6mm) | 34.98" (888.5mm) | ||
|
|
|
|
| |
2.0" (50.8mm) | 3.813" (96.8mm) | 23.58" (598.9mm) | 24.48" (621.8mm) | ||
|
|
|
|
| |
2.0" (50.8mm) | 3.813" (96.8mm) | 23.58" (598.9mm) | 24.48" (621.8mm) | ||
|
|
|
|
|
* Does not account for 3.5" area in center of cabinet where door handle and lock could cause interference with equipment knobs if rack rails are located fully forward.
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. | AtlasSound.com |
TELEPHONE: (800) |
© 2006 Atlas Sound | Printed in U.S.A. | 000706 | ATS001458 RevC 7/06 |