Atmel AVR2070 4.7 Simple Web Interface

AVR2070
17
8240B-AVR-06/09
Figure 4-6-2 SAM-BA File Selection
Once the image has been selected in the “Send File Name” field, connect the SAM-
ICE JTAG unit to the AT91SAM7X-EK development board. Power on the target and
press the “Send File” button.
The programmer will begin communication with the AT91SAM7X-EK board and a lock
region message should pop-up shown in figure 4-6-3.
Figure 4-6-3 SAM-BA Lock Regions
Simply select the “No” button to begin programming. Upon completion of
programming the target, the SAM-BA interface can be closed which will disconnect
the SAM-ICE JTAG programmer from the AT91SAM7X-EK board causing a RESET.
The uTasker RUM demo should initialize and begin flashing the DS1 LED on board
the evaluation kit at a rate of ~ twice per second.
4.7 Simple Web Interface
In order to connect to the simple web interface, the webpages must first be loaded
into the SAM7X via FTP. In the source code package, locate the \web_pages folder
and notice the simple webpage files. If running Windows, open and run the
Copy_all.bat file to initiate the FTP transfer. This can be manually done for command
line operation.