CAMELIACOL 2.5M user guide
3/12
1. IMAGING SYSTEM DESCRIPTION
♦ CAMELIA camera is powered by a +24V power supply.
♦ CAMELIA camera is configured through the serial port of the computer.
♦ CAMELIA camera sends digital video to the FGT frame grabber.
♦ As CAMELIA 's CCD is a full frame sensor, you must use either pulsed lightning or a chopper/shutter in front of
the camera in order to have incident lightning on the CCD only during integration time. You must design an
electro-optical interface to drive camera, shutter/chopper or lightning by using the "SHUTTER" signal delivered
by the camera. If required, the system can send an external trigger or external ITC (integration time control
signal) to the camera.
POWER
RS232
DATA & SYNC
FRAME
GRABBER
COMPUTER
SERIAL
PORT
POWER SUPPLY
+24V
TRIG_ITC
ANALYZED OBJECT
SHUTTER / CHOPPER
ELECTRO-OPTICAL
INTERFACE
CAMELIALIGHTNING