CAUTION: FOLLOW THE CONNECTION SEQUENCE DESCRIBED BELOW TO ENSURE PROPER
RECOGNITION OF THE CD CHANGER BYTHE FACTORY RADIO.
DONOT FORCE CONNECTORS TOGETHER. LINE UP LOCATING TABSAND CAREFULLY
MATECONNECTORS.

INSTALLATION INSTRUCTIONS FOR THE CDC-TO2: (See Installation Diagram)

1. Mountthe CD Changer in the rear of the vehicle. Refer to the installation instructions supplied with
theCD Changer.
2. Besure the ignition switch and the radio are in the off position.
CAUTION: Ifnot, the radio will not recognize the changer.
3. Removethe factory radio from the dash panel.
4. Disconnectthe power/speaker harness between the car and the radio.
5. Connectthe CDC-TO2 to the Changer using the 5 Meter DIN Cable supplied with the CD Changer.
6. Plugthe 12 Pin Connector from the CDC-TO2 into the mating socket on the rear of the factory radio.
7. Re-connectthe radio power/speaker harness.
8. Resetthe Changer and insert the CD magazine.
9. Re-installthe radio into the dash panel.
10. Turnon the ignition and radio and perform an operation check.

OPERATION CHECK:

1. LoadCD’s into the CD Changer magazine and insert the magazine into the changer.
2. Startvehicle and allow CD Changer to cycle. Performa brief functional test to verify proper operation
accordingto the Owner ’s Manual.
 ©1998 AudiovoxCorporation, 150 Marcus Blvd., Hauppauge, N.Y. 11788
INSTALLATIONGUIDE FOR:
Model CDC-TO2
128-5409
CD CHANGER INTERFACEfor TOYOTA VEHICLES
1998-99 Avalon
1998-99 Camry
1998-99 Celica
1998-99 Corolla
1998-99 Land Cruiser
1998-99 Paseo
1998-99 4-Runner
1998-99 RAV4
1998-99 Sienna
Compatible with following Toyota factory radio models in above vehicles (model number is printed on face
panelof radio):

IMPORTANT

Worksonly in conjuction with Audiovox 10 disc CD Changer (except P-1000)
Foruse with Toyota vehicles factory radios as listed in the following vehicles:
1998-99 T-100
1998-99 Tacoma
1998-99 Tercel
11801
11802
16408
16410
16808
16810
51800
56808
A51707
A51801
A56409
AD1701
AD1702
AD6401
AD6801
AD6802