Audiovox GX2411ci manual Telephone Operation, If the Handset is on the Base Unit

Models: GX2411ci

1 34
Download 34 pages 13.21 Kb
Page 15
Image 15

GX2411ci English I/B ver. 09010A-1

page 25.

SETTING THE CALLER ID CALL WAITING (CIDCW) FUNCTION

The CIDCW function must be set to ON position in order to use CIDCW function. See PROGRAMMING MODE section on page 25.

TELEPHONE OPERATION

TO PLACE A CALL IN TALK MODE

1.Press the TALK button on the handset. The LCD Display

will show "TALK" and the

symbol

will flash while the

 

unit auto-scans and will light steadily when it finds a clear channel.

(Figure 13)

2.Listen for a dial tone.

3.Dial the telephone number. The phone numbers appear on the LCD Display as you enter the number.

4.When finished with your call, press the TALK button or place the handset on the base unit.

TO PLACE A CALL IN STANDBY MODE (PREDIAL MODE)

1.Ensure that the unit is in standby mode.

2.Dial the telephone number or press RE/PA button. If you

make a mistake, press VOL /

 

button to delete

(Figure 14)

 

the character on the left of the cursor.

 

3.Press C. BACK button.

4.When finished with your call, press the TALK button or place the handset on the base unit.

TO RECEIVE A CALL

NOTE: If you are expecting incoming calls, the handset must be programmed to RING ON mode. See PROGRAMMING MODE section on 26.

A.IF THE HANDSET IS ON THE BASE UNIT

1.Since the GX2411CI features “Auto-Answer”, simply pick up the handset from the base cradle when the phone rings. The LCD Display will show "TALK" and the symbol will light steadily.

2.Start your conversation.

3.When finished with your call, either press the TALK button or place the handset on the base unit.

B.IF THE HANDSET IS OUT OF THE BASE UNIT

1.When the phone rings, press the TALK button on the handset.

2.Start your conversation.

3.When finished with your call, either press the TALK button or place the handset on the base unit.

LAST NUMBER REDIAL

A.AFTER HEARING A BUSY TONE WHEN PLACING A CALL

1.If you get a busy tone, press handset TALK button to hang up.

2.Press the handset TALK button again and listen for

a dial tone.

(Figure 15)

3.Press the handset RE/PA button. This will automatically redial the last telephone number you called (Up to 31 digits).

B.WHEN THE HANDSET IS OFF THE BASE UNIT AND IN STANDBY MODE

1.Press the TALK button on the handset and listen for a dial tone.

09010A-1

14

OWNERS MAN # GX2411ci VER. 09010A-1

PAGE: 14

English version

Page 15
Image 15
Audiovox GX2411ci manual Telephone Operation, If the Handset is on the Base Unit, If the Handset is OUT of the Base Unit