Audiovox VE1040 Connecting your VCR,

8
•If your antenna system has two sets of twin
300-ohm leads,purchase a combiner (available at
electronics stores). Place one set of twin leads
underneath the screws on the combiner and tighten
the screws. Do the same with the other set of twin
leads. Press the cable from the combiner onto the
ANT. IN terminal on the back of your VCR.
Connecting your VCR to your TV
1Connect one end of a coaxial cable to the RF OUT
terminal on the back of the VCR.
2Connect the other end of the coaxial cable to the
ANT. IN terminal on the back of the TV.
Connecting your VCR, continued
ANT.IN
VCR
ANT.IN
VCR