Configure an Avaya Meeting Exchange 5.0.1 S6800 Bridge
Issue 3 January 2008 107
Procedure 6: Configure the Avaya Meeting Exchange 5.0.1 S6800 Bridge
In this section, you will:
1. Configure the Meeting Exchange bridge for TLS or TCP so it will be able to communicate
with Avaya Communication Manager.
2. Configure the non-Ad-hoc video conferencing parameters for the Meeting Exchange bridge.
3. Configure the call branding digits that you will use to dial into the Meeting Exchange bridge.
4. Configure the dial outs for the Meeting Exchange bridge.
5. Configure Avaya Meeting Exchange 5.0.1 for Radisys CMS 6000.
6. Configure the Ad-hoc video conferencing parameters on the Meeting Exchange bridge.
7. Schedule conferences on Avaya Meeting Exchange 5.0.1 to ensure correct operation.
Note:
Note: You must log into the Meeting Exchange bridge using ssh with craft and su to
sroot. All configuration changes except cbutil require a system reboot for the
changes to take effect.
To configure the Meeting Exchange bridge:
1. Using a text editor, open the file /usr/ipcb/config/system.cfg, and make sure the following
parameters are configured:
MyListener
respContact
MaxChannelCount
MaxVideoChannelsAllowed
The following is an example of a TLS configuration:
# ip address of the server
IPAddress=xxx.xxx.xxx.xxx
#request we will be listening to
#TLS
MyListener=sip:6000@xxx.xxx.xxx.xxx:5061;transport=tls
#TLS
respContact=<sip:6000@xxx.xxx.xxx.xxx:5061;transport=tls>
#Audio port licensing depends on customer
MaxChannelCount=750
# video port licensing depends on customer
MaxVideoChannelsAllowed=125