2 Installing the MDW 9040 Pocket Phone System Dual Zone Administration
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-19020 Issue 2,February 2001
Administration for MERLIN MAGIX
See “Administration for MERLIN LEGEND” below.
Administration for MERLIN LEGEND
For MERLIN LEGEND Communications System s, you must administer 2 station ports (extensi ons)—one for
each radio module.
•For MERLIN LEGEND in Key Mode, call coverage should be set up between the
two station ports so that both station ports ring simultaneously on the handset.
•For MERLIN LEGEND in PBX mode, each station port needs 2 shared system
access buttons for the other station port.
See your MERLIN LEGEND Communications System manual for information on
applying call coverage setups or for programming shared system access buttons.
Administration for DEFINITY, Prior to Release 5.0
For DEFINITY Communications Systems prior to Release 5.0, you must administer 2 station ports
(2 extensions)—one for each radio module. Each station port must be administered with 3 call appearances of its
own and 3 bridged appearances of the other station extension number.
Administration for DEFINITY, After Release 5.0
For DEFINITY Communications Systems after Release 5.0, you must administer 2 station ports (2 primary
extension numbers)—one for each radio module. Administer station port 1 as the primary station port with call
appearances, and then administer station port 2 as a zero call appearance station with bridged appearances of
port 1 if the 9040 Pocket Phone is your only telephone. If you ha ve a wi red tel ephone, keep y our wi red te lephone
as the primary station port and administer both ports as zero call appearance stations with bridged call
appearances of the primary wired telephone.
Note: All bridged extension conventions apply. For example, when configured
as part of an ACD split, only the primary station port (extension) will
ring.