4 Registering the Pocket Phone to a Dual Radio Module Setting Up and Registering the
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-19036 Issue 2, February 2001
3 Press the Select-Row ( ) button to move the arrow to the right of the selected
option to Configuration.
4 Press the Softkey ( ) below Sel.
The initial Configuration Menu screen displays.
5 Press to move the arrow to Registration and then press the Softkey ( )
below Sel.
The Registration screen (Zone 1 and Zone 2) displays.
6 For single zone operation or the first zone of a dual zone installation, move the
arrow to Zone 1, then press the Softkey ( ) below Reg.
The following occurs:
•The selected radio module makes checks regarding the handset registration
request.
•If there are no unexpected conditions, the associated base module and
handset communicate using special link-up signaling.
•The handset displays the following screen when registration is completed.
(When selecting Registration in Step 5, this screen displays if the handset
was previously registered.)
Note: Repeat these procedures for a second handset registered to this radio
module or for multiple radio modules in a single zone configuration.
Options
Configuration Ä
Test M ode
Sel Exit
CONFIGURE MENU
Registration Ä
Button Map
Sel More Back
REGISTRATION:
Zone 1 Ä
Zone 2
Reg Back
IMPORTANT NOTE: After you enter the Registration Mode on the handset,
there is a 60 second time limit in which to register before the menu time’s out.
REGISTRATION:
Z1 Registered Ä
Zone 2
Reg Un-Reg Back