Using Handset Features Programming & Using the MDW 9040 Pocket Phone 5
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-190 Issue 2,February 2001 69
If desired, you can disconnect the headset from the handset without dropping the call,
either by unplugging the headset adapter from the handset or by releasing the Quick
Disconnect plug from the headset adapter cord. You can then use the handset as you
normally would.
Using the Headset
On/Off Button The headset On/Off button on the headset adapter cord becomes active only when the
headset is plugged into the headset connector. The headset On/Off button is identical
in function to the button near the dial pad.
Answering Calls with a
Headset When you receive a call, you will hear a ringing tone or feel a vibration coming from
the handset (you will not hear a tone from the headset itself).
To answer a call:
1 Press either the headset On/Off button on the headset adapter cord or the
button near the dial pad.
Placing Calls with a
Headset To place a call with a headset:
1 Press the On/Off button on the headset adapter cord or the button near the
dial pad to access an available line.
The microphone and earpiece in the handset are disabled.
2 Dial the call as you would on a wired system phone.
3 Press either the On/Off button on the headset adapter cord or the button
near the dial pad to end the call.