6 MDW 9040 Pocket Phone Compatibility Communications System Compatibility
MDW 9040 Wireless Pocket Phone Installation and Use,
503-801-19078 Issue 2,February 2001
Setting the Line
Ringing options for
PARTNER systems
Use the following guidelines to ensure optimal voice quality when using MDW 9040
Pocket Phones with a PARTNER, PARTNER Plus, PARTNER II, or PARTNER
Advanced Communications System in ke y mode.
Note: For PARTNER II and PARTNER ACS hybrid systems that use pooled
lines, set the Line Ringing options as described in the following table if
more than six MDW 9040 Pocket Phone handsets have the same pooled
line appearance.
The MDW 9040 Pocket Phone does not have a speaker; therefore, it does not support voice announce/page calls.
Telephone
Communications
System
TransTalk 9000 System
with 7 – 12 Handsets TransTalk 9000 System
with 13 – 18 Handsets
PARTNER 1 Set Line Ringing for the first
six handsets to Ring.
2 Set Line Ringing for each
additional handset to No Ring.
(Install an external audible alert
for these extensions.)
Not applicable; PARTNER supports up
to 12 phones.
PARTNER Plus
PARTNER II
PARTNER Advanced
Communications System
PARTNER Endeavor
1 Set Line Ringing for the first
six handsets to Ring.
2 Set Line Ringing for each
additional handset to Delayed
Ring.
1 Set Line Ringing for the first six
handsets to Ring.
2 Set Li ne Rin ging for han dsets 7 – 12
to Delayed Ring.
3 Set Line Ringing for each handset
beyond the first 12 (handsets
13 – 18) to No Ring. (Install an
external audible alert for these
extensions.)