Chapter 2 Hardware Installation
I/O card 1
NV7000H card 1
I/O card 2
NV7000H card 2
NV7000H | I/O | NV7000H | I/O |
card 1 | card 1 | card 2 | card 2 |
TV OUT | TV OUT |
2.8 Connecting the Watchdog line
The NV DVR program constantly monitors its operation. Connecting the NV3000/5000/6000/7000H to the motherboard reset switch panel, enables the unit to restart automatically and reset the system when an error has been detected.
i | If more than one NV3000/5000/7000H card is installed, connect the watchdog line |
at last card. |
2.8.1 Connecting the Watchdog line to NV3000/5000
1.Look for the labeled RESET SW switch lead and connect it to the NV3000/5000 card reset pin.
2.Connect the supplied Watchdog line to the NV3000/5000 card watchdog pin and the other end to the motherboard RESET SW panel. If you are not sure, please refer to the motherboard user manual.
3.You may now replace back the PC cover and connect all the cables.
Reset SW lead
Watchdog line
NV3000 
NV5000
15