Chapter 4 Using the NV DVR Software
Seconds of that minute, every Second of that 10 seconds. To go back, click
. To
view from the selected frame and close event search, click
.
4.11 To Search Using the Event Search
1.Click on the video screen on where you want to search.
2.Click Event Search. The Event Search text (red) would appear at the lower left corner of the screen.
3.In the Event Search Setting dialog box, check the type of condition you want to search. If you select POS, in the Find Text box, type the word. Then, click OK to start searching. The video search would stop at the frame that matches the condition. To keep on
searching click
.
4.You may also set to search and list all the result. Just check the Output Event List box. In the Search Duration section, set the Begin Time, End Time and Searching Interval. Then, click OK to start searching.
5.When the Event list appear, click and select the item you want to view.
4.12 To Search Using the Intelligent Search
1.Click on the video screen on where you want to search.
2.Click Intelligent Search. The Intelligent Search text (red) would appear at the lower left corner of the screen.
3.When the Intelligent Search Setting dialog box and motion detector frame appear, you may adjust the sensitivity bar and the motion detector frame size and location. To set motion detector frame size and location, left click and drag on the screen. Then, click OK to start searching. The video search would stop at the frame that matches the condition.
To keep on searching click
.
You may also set to search and list all the result. Just check the List box. In the Search Duration section, set the Begin Time, End Time and Searching Interval. Then, click OK to start searching.
39