Chapter 5 Customizing NV DVR System
5.9.7 To Setup SMS/MMS Setting:
To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial COMM port of PC. Beside the SMS/MMS check box, click Detail.
1.Select the port number in ComPort drop down list from where the GSM/GPRS modem is connected.
2.Click Modem Setup button to automatically detect the Modem Baud Rate.
3.In Local Phone Number text box, enter the GSM SIM card phone number.
4.In Phone Num text box, enter the contact number.
5.You may now set to send thru SMS &/or MMS. If you enable SMS setting, just enter the message in the text box. If you enable MMS, enter the APN name, WAP IP, MMS address and the message. If you are not sure, please contact your mobile service provider.
6. Attach image when sensor is triggered select the camera that the images will be capture and send when the sensor is triggered.
7.Click OK to accept the new settings and Cancel to exit without saving.
iMake sure your ISP provider and cell phone provider both support JPG file format transmitting.
5.9.8To Setup PTZ Preset Point:
Beside the PTZ preset point check box, click Detail. In the Trigger PTZ Preset Setting dialog box, select the PTZ camera number then select the Enable check box. Select the position of the PTZ camera when the alarm is activated and ended. For the PTZ camera ended point, user also can select one preset position or Auto Path between preset position group.
5.9.9To Setup Alarm SOP:
Beside the Alarm SOP check box, click Detail. In the step text boxes, type the standard protocol when the alarm is activated. When the alarm is activated, the Standard Operation Procedure dialog box will appear. Just click Next to see the next instruction, Back to see the previous instruction, Finish to end and Abort to terminate.
68