Chapter 8 Using the Remote Programs
| Name |
| Function |
|
| (13) Snapshot |
| Capture and save the screen shot either in *.jpg or *.bmp format. |
|
| (14) Full |
| Use the entire area of the screen to only display the video. |
|
| screen |
| To return, Right click the mouse or press ESC on the keyboard. |
|
| (15) Alarm |
| Alert and display warning info. Only |
|
|
|
| turn on, off and trigger the Sensor and Relay by |
|
|
|
| the Sensor and Relay list. |
|
8.3.1To Setup Remote Console Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting.
(1)
(2)
(3)
(4)
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour data, the system automatically replaces the oldest data. In case you have more than one storage path, the system automatically saves the data to the next storage path.
By default the data is stored in C:\RemoteData, to insert another storage path, click Add. To remove the selected path, click Delete.
If you want the system to automatically erase the data after a certain days, enable the Delete recorded data after check box and enter the numbers of days in Days text box.
(2) Language
Customize the system to display the tool tips and dialogs based on the selected language. By default the language is in English.
(3) Remote Server
Enter the NV DVR Server IP and Port number.
(4) Channel Settings
The numbers from 01 to 16 represent the camera ID. In Transmitting Channels section, enable the camera number to receive the camera signal from the server. In Visible Channels section, enable the camera number to view the camera signal on Remote Console screen. To select all the cameras, enable the ALL check box.
86