Cyclades-PR1000
Chapter 13 - IPX 103
The routing table is displayed by the menu option INFO => SHOW ROUTING TABLE => IPX. For the example, and
using only the static route created above, the routing table appears as in Figure 13.2.
Destination Interface/ Subinterface/
Remote address hops ticks Type
00000001 0 1 PrimaryNet
00A0B000 Ethernet 0 1 Connected
00010001 Slot1 Node 00602E001100 1 1 Static
00B0C000 Slot1 0 1 Connected
FIGURE 13.2 ROUTING TABLE FOR THE EXAMPLE
The SAP (Service Advertisement Protocol) Table
In Novell networks, a given server can provide various services. In order for the router to identify these servers,
their locations and services are entered into a SAP table in the router. This is done using the menu CONFIG
=>IPX => SAP TABLE. The parameters for each entry are shown in the table.
SAP Table Menu CONFIG =>IPX => SAP TABLE
Parameter Description
Service Type Service this server offers. ? provi des a list of valid codes. For th e server Columbo, in
the example, this code is 0166.
Server Name In the example, the name is Columbo.
Service Network
Number 00000003
Server Node 00602e001111
Server Socket
Number ? provides a list of valid codes.
Number of Hops Number of routers between this r outer and the server. 0 in t he example.