Chapter 3: Local Port Operation 41
CAUTION: Monitor damage can result from the use of Energy Mode with monitors not compliant
with ENERGY STAR®.
5. (Optional) Click Test to activate the screen saver test which lasts 10
seconds then returns you to the Security dialog box.
6. Click OK.
NOTE: Activation of the screen saver mode disconnects the user from a server; no server is
selected. The status fl ag displays Free.

To exit the screen saver mode:

Press any key or move your mouse. Any previous server conne ction will
be restored.

To turn off the screen saver:

1. In the Security dialog box, clear Enable Screen Saver.
2. Click OK.

To immediately turn on the screen saver:

Press Print Screen, then press Pause. This command only works when the
user is connected to a server.
Setting the Keyboard Country Code
NOTE: Using a keyboard code that suppo rts a language different fr om that of your DSR
fi rm w ar e w il l ca use incorrect keyboard map ping.
Sun servers may use key mappings for foreign keyboards. By default, DS
appliances send the US keyboard country code to Sun and USB modules
attached to servers, and the code is applied to the servers when they are
powered up or rebooted. Codes are then stored in the DSRIQ.
Issues may arise when you use the US keyboard country code with a keyboard
of another country. For example, the Z key on a US keyboard is in the same
location as the Y key on a German keyboard. Sun servers will interpret
pressing the Y key on a German keyboard as pressing the Z key when the US
keyboard country code is used.
The Keyboard command enables you to send a different keyboard country
code than the default US setting. The specified country code is sent to all
servers attached to the DS appliance when they are powered up or rebooted,
and the new code is stored in the DSRIQ.