Chapter 2: Installation | 15 |
|
|
Figure 2.4: IP Parameter Setup
5.Obtain the IP address through DHCP by entering setip DHCP.
- or -
Enter static IP parameters, using the following as an example:
setip IP 192.168.1.53 (space) 255.255.255.0 (space) 192.168.1.1
NOTE: For the DHCP server reservation, locate the MAC address on the bottom of the EVR1500 environmental monitor appliance or on the IP Parameter Summary window displayed as HWaddr in Figure 2.3.
6.Reboot the EVR1500 environmental monitor appliance by entering reboot on the Terminal screen.
7.After you have rebooted the appliance, at the login prompt, enter root as the username and root as the password.
8.Verify the new IP parameters by entering ifconfig. The IP parameters are displayed as shown in Figure 2.3.
9.Log out of the Terminal screen by entering logout.