PLEASE READ BEFORE INSTALLING
WARNING: To prevent fire or shock hazard, do not expose this unit to rain or moisture. Care should
be taken to prevent objects or liquid from entering the enclosure. Never handle the power cord with
wet hands.
·
· The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user of the
presence of uninsulated "dangerous voltage" within the product's enclosure that may constitute a risk
of electric shock to you.
·
· The exclamation point within an equilateral triangle is intended to alert the user of the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the unit.
·
· Caution: To prevent the risk of electric shock, do not remove cover. No user-serviceable parts
inside. Refer servicing to qualified service personnel.
·
· Unplug the Preamplifier Tuner from the AC outlet when plugging in or unplugging cables, when left
unused for an extended period of time, when moving, or when you suspect lightning in your area.
·
· Prevent damage to the power cord. Do not bend, pull, place objects on, alter, etc. Replace the
power cord if it becomes damaged. Always grasp the plug on the power cord when plugging in or
unplugging the Preamplifier Tuner from the AC outlet.
·
· Your system may produce sound levels capable of causing permanent hearing loss. Do not operate
for extended periods of time at high volume levels.
·
· Make sure the Preamplifier Tuner is placed on a level surface.
·
· The Preamplifier Tuner is equipped with raised feet to provide ventilation, reduce acoustic feedback,
and provide protection against scratching the surface the unit is resting on. Do not remove them.
·
· Do not stack anything on top of the preamplifier tuner (processor, source, etc.) Leave a minimum of
2" clearance from the top of the Preamplifier Tuner to the next shelf (or component) to insure proper
ventilation.
·
· The Preamplifier Tuner should be located away from other sources that may be sensitive to heat.
·
· Do not perform any internal modifications to the Preamplifier Tuner.
·
· Always connect the preamplifier power cord to a dedicated AC outlet for normal operation.
·
· If young children are present, adult supervision should be provided until the children are capable of
following all rules for safe operation.
·
· Mistaking CONTROL OUTPUT or CONTROL INPUT connectors for audio/video inputs or outputs
may damage your Preamplifier or other components.
·
· Damage may occur to your speakers when the power rating of the driver is exceeded while playing
back music processed by the Preamplifier. Ensure that all the drivers in your system are capable of
handling not only the average power being delivered by the power amplifiers, but also the peak power
that is likely to be generated during strong passages. If you are unsure of your speaker's power rating,
contact the speaker manufacturer or the dealer where you purchased them.
·
· The Preamplifier Tuner should be serviced by qualified personnel when:
A. The Preamplifier Tuner is not functioning properly.
B. The Preamplifier Tuner was exposed to rain or other type of moisture.
C. The Preamplifier Tuner was dropped, or the chassis is damaged.
2SAFETY PRECAUTIONS
Installation Considerations
CAUTION
RISKOFELECTRICSHOCK
DONOTOPEN