Banner MPS-15, MPS-15-230 manual

MICRO-AMP® System

Printed in USA

SUPPLY VOLTAGE: model MPS-15 is for 105 to 130V ac (50/60Hz);

model MPS-15-230 is for 210 to 250V ac (50/60Hz).

OUTPUT CONFIGURATION: SPDT electromechanical relay.

Contact rating: 250V ac max., 30V dc max., 5 amps max. (resistive

load). Install MOV (metal oxide varistor) transient suppressor of ap-

propriate voltage across contacts used to switch inductive loads.

*Contact response: 20 milliseconds open and close.

Mechanical life: 10,000,000 operations.

*NOTE: dc loads may be easily connected directly to the output(s) of

the MICRO-AMP module used with the chassis in order to bypass the

relay and therefore take advantage of the 1 millisecond response time of

the module (see MICRO-AMP module specications and hookup).

COMPATIBLE MODULES: models MA3, MA3A, MA3-4, MA4-2,

MA4G, MA4L, MA5. Do not plug modules with current-sourcing PNP

outputs (MA3P, MA3-4P, etc.) into the socket on the MPS-15.

POWER FOR EXTERNAL DEVICES: 40 milliamps is available

to power external 10 to 30V dc devices (e.g.- two additional MICRO-

AMP modules or two MINI-BEAM sensors, etc.).

OPERATING TEMPERATURE:

-40 to 70 degrees C (-40 to 158 degrees F).

NOTE: for hookup of sensors or inputs to the module socket,

see the hookup diagram for the module used.

MPS-15 Series power supplies are designed specically to supply power for the Banner

MICRO-AMP series ampliers and logic modules. They are constructed on small PC

boards that are track-mountable for compatibility with other track-mounted MICRO-AMP

components. The MPS-15 includes a socket for a MICRO-AMP amplier or logic module.

The combination of an MPS-15 series power supply and a MICRO-AMP module makes

a complete and compact sensing and/or control system.

A built-in 5-amp rated SPDT output relay is supplied for easy interfacing to an external

load or circuit. Its action is controlled by the outputs of a MICRO-AMP module which

is plugged into the on-board module socket. A switch on the PC board selects which

module output (normally open or normally closed) will activate the relay.

Two models are available. Model MPS-15 is for 120V ac operation. Model MPS-15-230

is for 220/240V ac power. Up to three MICRO-AMP modules may be powered by one

MPS-15 power supply. A 4-inch (100mm) long mounting track is supplied with each

MPS-15. Optional 6-inch (150mm) track model TR100-6 neatly accomodates the MPS-

15 Series PC board plus the PC boards of two additional RS8 sockets to form a complete

three-module MICRO-AMP sensing/logic system.

P?N 03356F3C