3. Connections
3. CONNECTIONS
Overview
• Removing the Connector cover
• Power Connection
• Input facilities
• S-Video input
• Composite Video input
• 5-Cable input
• Component Input
• Digital Visual Interface (DVI) input
• Computer input (RGB analog)
• RS232-422 IN connection
• Triggeroutputs
3.1 Removing the Connector cover
What is behind this cover ?
The power connector and all inputs are situated behind this cover.
How to remove the cover ?
1. Loosen the locking screw. (image 3-1)
2. Left up at the bottom and pull on the cover to loose.
Thecover makes a loud ’snap’ when removed. This is normal and does not damage the cover.
Image3-1
Removingthe input cover
When allc onnections are done, close the cover again and fix the locking screw.
3.2 Power Connection
AC Power (mains) cord connection
Use thesupplied power cord to connect your projector to the wall outlet.
Plugthe female po wer connector into the male connector at the back of the projector.
Plug the male connector into wall outlet.
R5976763 CINEVERSUM 60/70 22042004 15