7. Image Settings menu
How to change the saturation ?
1. Push the cursor key ↑or ↓to highlight Saturation. (menu 7-5)
2. Press ENTER to select.
A slider box appears.
3. Use the cursor keys to adjust the saturation setting.
↑or →key for richer colors (higher values).
↓or ←key for lighter colors (lower values).
Image settings
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color temperature
White peak Off
Back
Menu7-5
7.6 Tint (hue)
About tint
Thetint function is used to adjust color hue to obtain true color re production and is only active for 60 Hz sources like NTSC signals.
For PALand SECAM sources, the tint is greyed out.
NTSC
Nationaltelevision system committee. Theorganization that developed the analog television standard currently in use
in the U.S., Canada, and Japan. Now generally used to refer to that standard. The NTSC standard combines blue,
red,and green signals mo dulatedas anAM signal with an FM signal for audio.
PAL
Phase alternate line. The television broadcast standard throughout Europe (except in France and Eastern Europe,
where SECAM is the standard). This standard broadcasts 625 lines of resolution, nearly 20 percent more than the
U.S. standard, NTSC, of 525.
SECAM
Sequentialcouleur avec mémoire. Thetelevision broadcast standard in France, the Middle East, and most of Eastern
Europe, SECAM provides for sequential color transmission and storage in the receiver. The signals used to transmit
the color are not transmitted simultaneously but sequentially line for line. SECAM processes 625 lines, a maximum
of833 pixels per line and 50 Hz picture frequency. SECAMis used as a transmission standard and not a production
standard (PALis typically used).
R5976763 CINEVERSUM60/ 70 22042004 37