9. Service Mode
Start Up
1. Push the cursor key ↑or ↓to highlight Preset Input Balance. (menu9-34)
2. Press ENTER to select.
The following warning will be displayed : (menu 9-35)
Preset inputbalance is reserved to qualified service personnel. Ifyou are not qualified, press EXIT to cancel the panel adjust-
ments.
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-34
WARNING
PRESET INPUT BALANCE
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return
Menu9-35
9.14 Advanced Processing
Overview
• Minimum Delay
9.14.1 Minimum Delay
Purpose
Innormal mode, the processing (scaling and de-interlacing) in DLP projectors introduces a few frames delay(from input to screen).
Settingthe option Minimum Delay to "ON" disablesall scaling and de-interlacing in the processing and reduces frame delay of the
projector(from input to screen) to ONE frame, caused by the forma tter board (DLP technology restriction). The intended use of this
optionis to apply native and progressive data to the projector and displaying it with minimum delay, using the full resolution of the
projector. Other formats will be displayed either unscaled and/or interlaced.
Thisfeature can be used if additional delay in the projector is not acceptable. Forinstance if a projector is showing the DVI loop out
of another DLP or if an external scaler/de-interlacerdoe sth e processing.
How to toggle
1. Push the cursor key ↑or ↓to highlight Advanced Processing. (menu9-36)
2. Press ENTER to select.
The Advanced Processing menu willbe displayed. (menu 9-37)
3. Select Minimum Delay and press ENTER to toggle between [ON] or [OF F].
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-36
ADVANCED PROCESSING
MINIMUM DELAY [ON]
<ENTER> to toggle
<EXIT> to return
Menu9-37
R5976801 SLMR9+ 20/10/2004 115