3. Installation Guide lines
WARNING:Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Dono t use liquid cleaners on the cloth as doing so will contaminate the cloth.
CAUTION:Otherlen ses can also be cleaned safely with this TorayseeTM cloth.
3.8 Battery Installation in the RCU
How is the battery delivered ?
Abattery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord.
How to install ?
1. Remove the battery cover on the backside of the remote control by pushing the indicated handle a little towards the bottom of
the RCU. (image 3-20)
2. Lift up the top side of the cover at the same time.image 3-20
3. Insert the new 9 V battery (type E-block or equivalent) in the lower compartment.
4. Connect the battery (B) to the contact plate (A). (image 3-21)
5. Insert the battery into the lower compartment and put the cover back.
6. Insert a overview card (C) in the back side.image 3-21
Image3-20
Openingthe battery cover of
theRCU
A
B
C
Image3-21
Mountingthe battery into the RCU
3.9 Stacking Projectors
What is possible?
Upto 3 pro jectorscan be stacked on each othe rwithout using extra too lsor accessories.
26 R5976801 SLM R9+ 20/10/2004