5. Getting Started
ERROR
DMD out of operating
temperature
range
Automatic shutdown is
activated
Menu5-1
5.4 Quick Set Up Adjustments
Overview
• Quick Language Change
• Quick Lens Adjustment
• Quick On Screen Color change
5.4.1 Quick Language Change
What can be done?
Onlyif different on screen languages are available, these can be changed in quick way by following the next procedure.
How to change
1. Press ENTER to start up the adjustment mode.
2. Press the cursor key ↑or ↓to highlight Service. (menu 5-2)
Whenpassword protected, your password will be asked. (moreexplanation about access by password can be found in Chapter
’Start up the Adjustment mode’.
3. Press ENTER to display the Service mode menu.
4. Push the cursor key ↑or ↓to highlight Change Language . If not visible in the menu, highlight first More and press ENTER to
displaya second service m enu. Select then Change Language. (menu5-3)
5. Press ENTER to display the language selection menu.
6. Push the cursor key ↑or ↓to highlight the desired language. (menu5-4)
Note: For the moment, only English is available.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu5-2
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu5-3
CHANGE LANGUAGE
ENGLISH
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu5-4
5.4.2 Quick Lens Adjustment
Quick zoom/focus adjustment
1. Press the Selection key *, Barco key.
Thezoom/focusmenuwillbedisplayed.(image5-3)
2. Push the cursor key ↑or ↓to zoom and ←or →to focusthe image.
3. When finished, press EXIT key to return or ENTER to con tinue to the shift adjustment.
48 R5976801 SLMR9+ 20/10/2004