7. Random Access Adjustment Mode
Adjustment of Active lines (Lact) of second projector
1. Go to File –> Edit menu of second projector.
2. Enter value for vertical act (= Lact) as follows :
Lact= [(Vert.. resolutionof 1 projector)/(Total vert. screenresolution)] x (vert. resolutionsource)
3. Vertical start (= Lstart) = original start + [(Vert. r esolutionsou rce) minus(newly calculated Lact)]
Example
Verticalresolution source : 1200 lines
Verticalresolution projector 1 & 2: 768 lines
Overlap : 50 lines
Totalvertical screen size : 1486 lines
Lact projector 1 = (768 / 1486) x 1200 = 620 lines
Lact projector 2 = (768 / 1486/) x 1200 = 620 lines
Lstart projector 2 = Lstart projector 1 + (1200 – 620)
7.5.7 ScenergiX size adjustment
What can be done with the ScenergiX size menu?
Within this menu the width of the blending zone is set up.
How to adjust the size?
Only accessible when the status is in the ON position.
1. Push thecursor key ↑or ↓to highlight one of the four size adjustments, Top, Bottom, Left or Right. (menu 7-51)
2. Press ENTER to select.
A pattern with the differentareas will be displayed. (image 7-12)
3. Use the cursor keysto move the border of the overlap area to the desired position (value between 0 and 255).
Setfirst the width of th e first projector and repeat for the second one. (image 7-13, image 7-14)
SCENERGIX
STATUS [ON]
- size -
TOP
BOTTOM
LEFT
RIGHT
- black level -
LEVEL
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu7-51
82 R5976801 SLM R9+ 20/10/2004