9. Service Mode
3. Push the cursor key ↑or ↓to highlight Projector address.
4. Press ENTER to activate.
The first digit will be highlighted.
5. Reprogram the address with ↑,↓,←,→keys
Usethe ↑or ↓key to select a new value, use the ←or →key to select a new digit.
Or,
use thenume rickeys on the RCU to enter the new address.
Theaddress m ustb e between 0 and 9 when controlling the projector with the RCU or
between 0 and 255 when controlling the projector via RS232.
How to change the common address
1. Push the cursor key ↑or ↓to highlight Change Proj Address.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-15
2. Press ENTER.
TheChange ProjectorAddress menu will be displayed and the actualaddress will be filled in.
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS (RC5) 0
COMMON ADDRESS (PPM) 0
Select with ↑or ↓
then <ENTER>
Reprogram with ↑,↓,←,→
or numeric keys
<ENTER> to confirm
<EXIT> to return.
Menu9-16
3. Push the cursor key ↑or ↓to highlight Common address.
4. Press ENTER to activate.
The address digit will be highlighted.
5. Select 0 or 1 with the ↑or ↓keys
Or,
enter the new value with the numeric keys.
9.7 SerialCommunication
Overview
• Start Up of the Serial Communication
• Baud rate Setting
• Setting up the Interface Standard
• RS422 Termination
R5976654 SLM R12+ 27/01/2005 115